Pepperl+Fuchs
Pepperl+Fuchs NJ15+U2+N Inductive Proximity Sensor, 15mm, 8V
Manufacturer : Pepperl+Fuchs
NJ15+U2+N
Inductive sensor NJ15+U2+N
Comfort series
15 mm flush
Switching function : Normally closed (NC)
Output type : NAMUR
Rated operating distance : 15 mm
Installation : flush
Assured operating distance : 0 ... 12.15 mm
Reduction factor rAl : 0.4
Reduction factor rCu : 0.3
Reduction factor r304 : 0.85
Output type : 2-wire
Nominal ratings
Nominal voltage : 8 V
Switching frequency : 0 ... 120 Hz
Current consumption
Measuring plate not detected : min. 3 mA
Measuring plate detected : ≤ 1 mA
Compliance with standards and directives
Standard conformity
NAMUR : EN 60947-5-6:2000
IEC 60947-5-6:1999Approvals and certificates
FM approval
Control drawing : 116-0165
UL approval : cULus Listed, General Purpose
CSA approval : cCSAus Listed, General Purpose
CCC approval : CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature : -25 ... 100°C (-13 ... 212°F)
Mechanical specifications
Connection type : screw terminals
Information for connection : A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %Core cross-section : up to 2.5 mm2
Minimum core cross-section : without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section : without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material : PBT
Sensing face : PBT
Degree of protection : IP68
General information
Use in the hazardous area : see instruction manuals
Category : 2G