Your One Stop for Industrial Products
Cart 0


Resideo S9200U1000 Universal Integrated Furnace Control

$ 128.99

Resideo S9200U1000 Universal Integrated Furnace Control

Manufacturer: Resideo
Model: S9200U1000
Description: Universal Integrated Furnace Control
Packaging Condition Details: New In Open Manufacturer's Packaging

  • Main burner ignition using a 120V hot surface igniter.
  • Flame rectification circuit to monitor flame presence.
  • Monitoring of system pressure switch, high temperature limit, and rollout functions.
  • Appliance operation/safety requirements controlled via microprocessor.
  • Control of a standard induction-type circulating fan motor (based on appliance requirements), in response to a conventional low voltage or EnviraCOM thermostat.
  • LED system status, performance and diagnostic indication.
  • Wire harnesses provided for simple replacement of most IFCs and integration with most heating and cooling appliances.
  • Twinning capability
  • EnviraCOM communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control.
  • Description: Universal single stage heating & cooling
  • Line Voltage: 120Vac (97-132 Vac)
  • Low Voltage: 24V (18-30Vac)
  • Frequency: 60 Hz
  • Operating Temperature (F): -40 F to +175 F
  • Operating Temperature (C): -40 C to +79 C
  • Operating Humidity Range (% RH): 0% to 95% non-condensing
  • Igniter Current: 1.0A resistive @ 95Vac output
  • Thermostat Anticipator Setting: (Stage 1 only) 100mA
  • PrePurge: 30 seconds
  • HSI Warmup Time: 17/27 or 30/30 seconds
  • Trial For Ignition: 4, 6, or 8 seconds
  • PostPurge: 15 seconds
  • Interpurge: 60 seconds
  • Ignition Trials: Three, two tries if flame is not sensed
  • Flame Failure Response Time: 2 Seconds max @ 1µA
  • Number of LEDs: 3
  • Heat On Fan Delay: 30 or 60 seconds
  • Heat Off Fan Delay: 60, 90, 120, or 180 Seconds
  • Cool Fan On Delay: 5 seconds
  • Cool Fan Off Delay: 0 or 60 seconds
  • Gas Control Used With: Any 24Vac redundant, direct ignition gas control rated at 1.5A or less. Honeywell VR8205 recommended.
  • Cooling Contactor Used With: Any 24Vac contactor rated at 1.0A or less
  • Induced Draft Blower Load: 2.2FLA / 25LRA max @120Vac
  • Circulator Load: 14.5FLA / 25LRA max @120Vac
  • Type of Fan Used With: Standard Induction-Type Circulating Fan

Share this Product